This page is a full-screen self-destruct countdown. A large clock counts down to the hundredth of a second between bands of hazard stripes, the screen glows with a slow alarm pulse, and the panels either side report a failing reactor and an evacuation in progress at an invented research station. You can stop it with an abort code, or let it reach zero and watch the facility go dark. Underneath the drama it is an ordinary, accurate countdown timer, so it works as a timer for streams, escape rooms, classrooms, and parties. Click ⛶ FULLSCREEN and it fills the screen.
No. Everything on the screen is simulated. Halvard Deep Site, Sector K-4, the reactor readings, the evacuation log, and the authorisation details are made up, and the header says SIMULATION. The page does not connect to anything, control anything, or fetch any data. The only real thing on it is the clock, which counts real time.
The CUSTOM box takes any time from 1 second to 99 minutes 59 seconds. A plain number is read as minutes.
5 is five minutes, and 2.5 is two and a half.1:30 is one minute thirty seconds. 1:15:00 is an hour and a quarter.45s is forty-five seconds, and 1h15m or 4m30s work too.Changing the length resets the countdown to the new time and waits for START. The number keys only change it while the countdown is not running, so a stray key press cannot wipe out a timer halfway through a lesson.
With no code set, any code of four or more letters or digits is accepted, so a presenter can type anything that looks convincing. To make it a real puzzle, add code= to the link: with ?code=7341, only 7341 stops the countdown. Letter case does not matter, and codes can be up to twelve characters.
Three wrong codes in a row lock the keypad for ten seconds. A correct code takes about a second and a half to verify, and the countdown keeps running during that time, so a code entered with one second left is too late. That is deliberate. Esc or CANCEL closes the code box without stopping anything.
The clock reads 00:00.00 and the warning changes to DETONATION. Over two and a half seconds the whole screen fades up to white, holds there for a second, then fades down to black over three seconds. A dim field of static comes up behind the words CONNECTION LOST, with a counter showing how long ago the facility was last heard from.
Nothing flashes. It is one slow rise and fall in brightness across about six seconds, far below the guideline of three flashes a second. With reduced motion set in your operating system, the white phase is skipped, the screen fades straight to black, and the static is a still image. With ↻ LOOP on, the countdown re-arms and starts again about ten seconds after CONNECTION LOST appears. Otherwise it stays dark until you reset it.
Every setting except sound is kept in the address bar, and the address updates as you click. Set everything on screen and copy the link, or write one yourself:
| Parameter | Values | What it does |
|---|---|---|
| t | 1 to 5999 | Countdown length in seconds. t=600 is ten minutes, t=5400 is ninety. |
| start | 1 | Start counting as soon as the page opens (the AUTOSTART button). |
| theme | red, amber, blue | Red Alert (the default), Amber Industrial, or Sci-fi Blue. |
| loop | 1 | Re-arm and run again after each detonation. |
| code | letters and digits | The only abort code that will be accepted. |
| clean | 1 | Open with the controls hidden. Press H, or click the invisible ☰ CONTROLS button in the top-right corner, to bring them back. |
For example, https://xscript.net/self-destruct-countdown?t=900&theme=amber&start=1 opens a fifteen-minute amber countdown that is already running. A link with only ?t=600 opens a ten-minute countdown that waits for START.
Sound is never switched on by a link. Browsers block audio until you interact with a page, and an alarm that starts by itself is not friendly anyway.
For a "starting soon" screen or a break timer, set the time and theme, turn on AUTOSTART, press H to hide the controls, and copy the address. In OBS, add a Browser source, paste the link, and set the width and height to your canvas, 1920 × 1080 for a 1080p stream. The countdown starts from the full time whenever the source loads, so if Refresh browser when scene becomes active is ticked it restarts each time you switch to that scene. To have it ready but not running, leave AUTOSTART off and use Interact on the source to press Space when you go live. For the alarm sounds, tick Control audio via OBS, then Interact and press M. The streaming toolkit covers browser sources, capture settings, and colours that survive compression in more detail.
Open a link with the room's time limit and your code, for example ?t=3600&code=ORION7, and press F for fullscreen so the address bar and the code in it are out of sight. Hide the controls with H. Leave LOOP off, so that when time runs out the screen stays on CONNECTION LOST as a clear signal that the team has lost. Anyone at the keyboard can open the code box with A, so leave the keyboard on the table and hide the code somewhere in the room. Set the computer's display sleep to "never" before the session, or the screen may go dark on its own long before the countdown does.
Amber Industrial and Sci-fi Blue are easier on a room than Red Alert, and both still read clearly from the back. Sound stays off unless you turn it on. With sound on, a longer countdown only chirps once a minute, so it does not compete with whoever is talking; the beeping starts in the final minute. The hundredths are set smaller and dimmer than the minutes and seconds, so from across a room the clock reads as a plain MM:SS and does not feel frantic during an exam.
The countdown is not built by counting animation frames or timer callbacks, which browsers slow down or stop in background tabs. Instead, every update measures how much time has passed using the browser's monotonic high-resolution clock (performance.now()) and subtracts that from the time left. If the page is hidden, Chrome and other browsers may only wake it a few times a minute, but the moment it wakes, the remaining time is exact again, and when you return to the tab the display is correct. If the computer sleeps and the monotonic clock pauses with it, the page also compares the wall clock (Date.now()) and counts the sleep.
What you see is rounded down to the hundredth, and it can only be as late as one screen refresh, about 17 ms on a 60 Hz display. If the countdown reaches zero in a background tab, the detonation is played from the point it would have reached, so you come back to CONNECTION LOST rather than to the start of the fade.
The backwards count started in fiction. Fritz Lang counted down to the rocket launch in his 1929 film Frau im Mond (Woman in the Moon) to build tension before liftoff, a film on which the rocket pioneer Hermann Oberth worked as an adviser. Rocket engineers adopted the idea, and the space programmes of the 1950s and 1960s made "T-minus" part of everyday language. The rocket launch simulator here runs that kind of count, holds included.
Real self-destruct mechanisms exist, but they are rarely dramatic. Rockets carry a flight termination system so the range safety team can destroy a vehicle that strays off course. Cryptographic equipment is built to "zeroise", wiping its keys the moment it is tampered with. Some munitions have self-destruct fuzes so that rounds which fail to explode do not stay dangerous for years. None of them come with a calm voice and a large clock.
Film and television supplied the clock. The original Mission: Impossible series, first broadcast in 1966, opened its episodes with a recorded briefing that destroyed itself after playing. The original Star Trek introduced a starship auto-destruct that needed codes from several senior officers in the 1969 episode "Let That Be Your Last Battlefield", and Star Trek III: The Search for Spock (1984) carried the sequence through to the end. Alien (1979) set the form that is copied most often: a ship's computer counting down in an even voice, a window in which the sequence can still be cancelled, and a heroine who tries to cancel it after that window has closed. Video games took it up too. Metroid (1986) ends with a timed escape from an exploding base after the final boss, a structure many later games borrowed.
The cliché of the timer stopped with a second or two to spare is older still. In Goldfinger (1964) the bomb in Fort Knox is stopped with its display reading 007.
The trope works because a visible deadline turns a plot into arithmetic the audience can do for themselves. Everyone in the room can see how long is left and judge whether the heroes will make it. The abort code adds a ritual, a step that can be done wrong, which is why escape rooms and game shows lean on the same device.
Countdowns for "starting soon", break, and giveaway screens on streams; final-hour clocks for escape rooms, LARPs, and tabletop sessions; New Year's Eve and party countdowns; film and video props for a sci-fi set or a villain's lair; classroom timers for quizzes and activities; and countdowns for hackathons, game jams, and office challenges. For OBS setup, see the streaming toolkit.
No. It is a prop and a timer. The facility, the reactor readings, the evacuation log, and the authorisation details are invented, and nothing on the page connects to or controls anything. The screen says SIMULATION in the header. Only the clock is real: it counts real time, accurately.
Unless the link sets one, any code of four or more letters or digits is accepted. To require a specific code, add code= to the address, for example ?code=7341. Three wrong codes in a row lock the keypad for ten seconds, and the countdown keeps running while a correct code is being verified.
Set the time, the theme, and AUTOSTART on screen, then copy the address bar. Or write the link yourself: ?t=600&start=1 opens a ten-minute countdown that is already running. The t value is in seconds, from 1 to 5999. Add theme=amber or theme=blue for the other colour schemes, and loop=1 to have it run again after it reaches zero.
Yes. The remaining time is worked out from the browser's high-resolution clock, not by counting frames or timer ticks, so it does not drift when a background tab is slowed down. The display catches up the moment you come back, and time spent with the computer asleep is counted too.
No. At zero the screen fades up to white over two and a half seconds and back down to black over three, a single slow change in brightness. The alarm glow pulses once every two seconds, and once a second in the last ten seconds. Nothing on the page flashes faster than once a second. With reduced motion turned on in your operating system, the pulses stop, the white phase is skipped, and the static is a still image.
Yes, for free. Click FULLSCREEN, or add the link as a browser source in OBS. Press H to hide the controls so only the countdown shows, or add clean=1 to the link so it opens that way. Every setting except sound is kept in the address, so a saved link reopens the same countdown.
Only if you turn it on. Sound is off every time the page opens; press M or click SOUND to enable it. It then plays a klaxon at the start and with one minute left, a short chirp at each whole minute, a beep every second in the last minute, a low rumble at zero, and a chime when the sequence is aborted. It goes quiet while the video version is playing.
The rocket launch simulator has its own T-minus countdown, with holds, a go/no-go poll, and a flight to orbit. Put the futuristic tech dashboard on a second screen to fill out the control room, and use the fake hacker terminal for the scene where someone types in the override. When the countdown is lost, cut to the system breached screen, but note that it flickers heavily; the accessibility notes explain which screens are safe for which audiences.