HOLOGRAM GLOBE SIMULATION
00:00:00 / 10:00:00
← EXIT

Hologram Globe — Holographic Earth Cyber Defence Screen

This page is the war-room screen from a science fiction film: a glowing, see-through Earth floating above a projector in a cyber defence command centre. The planet turns inside a shield of hexagons. Hostile arcs climb out of botnet clusters on every continent and break against the shield in small hexagonal ripples, while satellites circle on tilted orbits and beam traffic down to the data centres below. About every four minutes an incident begins: the camera swings round and zooms in on the city under attack, and the panels walk through detection, investigation, mitigation, and recovery. Every tenth incident is a global assault on five cities at once. Click ⛶ FULLSCREEN and it fills the screen.

Is any of it real?

No. It is an animation, and the bar under it says SIMULATION. The twelve botnet clusters, the attacks, the incident numbers, the satellites, the alerts, and every figure on the panels are invented and drawn in your browser. The fourteen city names are real places and the continents are drawn from a real land map, but nothing on the screen corresponds to real traffic, a real company, or a real attack. The page makes no connections while it runs and cannot reach your computer or anyone else's.

There is also no such thing as a planetary shield. Real defence happens at thousands of separate points: at the edge of each network, on each server, and at each login. The section on botnets and how defenders push back below explains what the shield and the arcs stand for.

What's on the screen

What happens

The screen has three kinds of event. They follow the same pattern every time, though the target, the attack type, and the timing change.

  1. Start-up. At the very start the planet builds itself from the top down behind a bright scan line while the projector, shield sectors, relays, and threat feeds report in.
  2. Incidents. About every four minutes (between three and five and a half) the alert goes up. The camera eases round to the target city and zooms in, the city turns red, and a flood of arcs from two botnet clusters hits it. The incident card in the lower left moves through four phases: detected, investigating, mitigating with a progress bar as more and more arcs are stopped short, and resolved. Each incident lasts from a little over a minute to just under two minutes, then the camera drifts back to its slow turn. There are six kinds: a DDoS attack, a ransomware wave, a spear-phish campaign, a zero-day exploit, a credential storm, and a C2 hijack attempt.
  3. Global assaults. Every tenth incident hits five cities at once from six botnet clusters. A GLOBAL ASSAULT banner appears, the camera pulls back and spins faster, the edges of the screen pulse red, and the shield reading drops to around 70%. After about a minute and a half, ASSAULT REPELLED reports how many attacks the shield absorbed.
  4. Deep scans. After every third incident, a magenta line sweeps down the planet from the Arctic to the Southern Ocean in seven seconds, and then every botnet origin lights up with ripples and names: 12 clusters and 36 origins mapped.

Moments worth seeing in the first hour (seek with the bar or use ?t=):

TimeSecondsWhat happens
00:00:000Start-up: the planet builds from the top down
00:00:4040First incident: a C2 hijack attempt on Dubai; mitigation from about 1:14, resolved at 2:03
00:03:36216Deep scan 01 sweeps the planet and maps the clusters
00:05:26326First global assault: London, São Paulo, Sydney, Mumbai, and New York; repelled at about 6:52
00:09:48588C2 hijack attempt on London
00:14:53893Spear-phish campaign against Dubai
00:17:471067Deep scan 02
00:33:392019Ransomware wave on Sydney
00:49:072947Second global assault: Toronto, New York, Tokyo, Mumbai, and London

Over the full ten-hour cycle there are 139 incidents, 14 of them global assaults, and 47 deep scans. Behind them, 75,600 hostile arcs break on the shield (just over two a second) and 28,800 friendly links cross between cities.

How to use it

The page draws at the full resolution of your screen, up to 4K. On a slow computer it lowers the resolution by itself to keep the motion smooth.

Keyboard shortcuts

Good uses

Background screens for films, series, and adverts set in a command centre, a spaceship bridge, or a cyber security firm; stage and event backdrops for technology talks and product launches; stream backgrounds and "starting soon" scenes for gaming and coding streams; escape rooms and live-action games that need a "global threat" screen; and ambient displays in a lobby, a games room, or an office that wants to look busy. It is calmer than the site's tower defense game screen and busier than the network operations centre. For OBS setup as a browser source, see the streaming toolkit.

Where the look comes from

Holography is real. The physicist Dennis Gabor invented it in 1947 and received the Nobel Prize in Physics for it in 1971. A real hologram records the pattern made when laser light reflected from an object meets a reference beam, and when it is lit again it shows the object in depth, changing as you move your head. It is usually a flat plate or film, not a glowing shape floating in the air.

The floating, flickering, see-through hologram is a film invention. It became a science fiction staple after the 1977 Star Wars film, and command-centre globes of this kind now appear in a great many films and games. Most "hologram" stage shows use a much older trick called Pepper's ghost: a bright image reflected in a sheet of angled glass or film that the audience cannot see. This screen copies the film version: cyan light, scanlines, a faint flicker in the dots, and the far side of the planet showing through.

Botnets, command and control, and how defenders push back

Nothing on this screen happens the way it is drawn, but each part stands for something real.

The six incident types on screen, and the real defences their remedies refer to:

On screenWhat it stands forHow defenders respond
DDoS attackA distributed denial-of-service flood: so much traffic from so many sources that a service cannot answer real usersFiltering at scrubbing centres and at the network edge, spreading load across many locations, and absorbing the peak
Ransomware waveMalware that encrypts files and demands payment to unlock themIsolating infected machines quickly, restoring from offline backups, and closing the way in
Spear-phish campaignEmails written for particular people, to trick them into giving up a password or opening a fileMail filtering, staff training, revoking stolen sessions, and resetting the affected credentials
Zero-day exploitAn attack on a software flaw that the vendor does not yet know about or has not yet fixedA temporary "virtual patch" (a filter rule that blocks the attack pattern) until the real fix is installed
Credential stormHuge numbers of login attempts with guessed or leaked passwords, often called brute force or credential stuffingRate limiting, lockouts, multi-factor authentication, and checking passwords against known leaks
C2 hijack attemptA botnet operator's control traffic, here imagined as an attempt to take over the defenders' own machinesBlocking and sinkholing the control domains and cleaning the infected hosts

The site's guide to what a DDoS attack is explains the most common of these in plain English.

The vocabulary

Botnet
A network of infected devices under one operator's control. The twelve on screen, from KESTREL to ONYX, are made up, each with three origin points on land.
Command and control (C2)
The channel an operator uses to give orders to a botnet. Cutting it is one of the most effective ways to stop one.
Sinkhole
Redirecting a malicious domain to a server that defenders control, so infected machines report to them instead of to the operator.
Honeypot
A decoy system set up to attract attackers and record what they do. The intercept feed reports when a botnet touches one.
Signature
A pattern that identifies a known piece of malware or a known attack. Security tools download new ones every day; the feed counts them in.
Rate limiting
Capping how many requests a single source may make in a given time, so floods and password guessing slow to a trickle.
Block rate
The share of hostile traffic stopped. On screen it sits above 99% and dips during incidents; real figures depend entirely on what is being counted.
Round-trip time (RTT)
How long a message takes to reach a far point and for the reply to come back, in milliseconds.

How the simulation works

The whole ten-hour cycle is worked out in advance from a fixed random seed: when each incident starts and ends, which city and clusters it involves, where the deep scans fall, and the start, origin, target, and type of every one of the 75,600 hostile arcs. The planet is drawn from a one-degree land map turned into dots, rotated and tilted by a camera that also eases onto each incident's target and back. Each arc is a great-circle path lifted above the surface; hostile arcs end where they cross the shield's radius, slightly larger than the planet's, and the hexagonal ripple is drawn on the shield at that point. Points on the far side are drawn dimmer instead of hidden, which gives the see-through look. Because every frame is a function of the time alone, the page can jump anywhere in the cycle at once, and the same moment always looks the same.

Frequently asked questions

Is this a real cyber attack map?

No. It is an animation. The botnet clusters, the attacks, the incidents, the satellites, and every number on the panels are invented and drawn in your browser. Only the city names and the shapes of the continents are real. The page connects to nothing and shows no real traffic.

Is it a real hologram?

No. It is a flat picture drawn in the style of a film hologram: see-through, glowing, with scanlines and a light cone from an emitter below. A real hologram is a recording of light that shows depth from different angles, and nothing on this page projects anything into the room.

How long does it run before it repeats?

Ten hours. The cycle holds 139 incidents, 14 of them global assaults, and 47 deep scans, each with its own target, botnet clusters, and timing. After ten hours it starts again from the beginning. The screen is calculated frame by frame rather than played from a recording, so it needs no download and never buffers.

Can I jump to the interesting parts?

Yes. Press N for the next event (an incident, a global assault, or a deep scan) and B for the previous one, or drag the seek bar. To open the page at a given moment, add ?t= to the address with the number of seconds, for example ?t=326 for the first global assault.

Can I use it in a video or on a stream?

Yes. It is free to use for videos, films, streams, presentations, and events. Click FULLSCREEN, or add the page as an OBS browser source at 1920 × 1080 or 3840 × 2160; the scene is drawn at the full resolution of the source.

Does it flash?

There are no full-screen flashes or white fades. During a global assault, fourteen times in ten hours for about a minute and a half each, a red glow pulses at the edges of the screen about once a second and the GLOBAL ASSAULT title pulses for its first six seconds. Attacks make small bright sparks where they hit the shield all the time. If your system is set to reduce motion, the page opens paused. See accessibility and visual effects for more.

Does it work offline?

Once the page and its fonts have loaded, the simulation makes no further network requests, so it keeps running if the connection drops. The optional VIDEO view streams from YouTube and needs a connection.

Related tools

The cyber attack map shows the same idea on a flat world map with country rankings, and the Orbital Command screen is a calmer night-side Earth for a network operations centre. For the game version, where data centres shoot attacks down for points, open the cyber defense game. The satellite tracking screen and the radar screen suit the same mission-control scenes, and what is a DDoS attack? explains the real thing.